CONTACT US
Orders can be placed through the following way
| sales@su-jiao.com | |
| +86-021-51131842 | |
| +86-13424755533 | |
| lookpolymers | |
|
Petrothene NA940094 物性表资料
低密度聚乙烯（LDPE）的应用：
LDPE复合挤压广泛作为高阻隔复合层压板的一种组分。重要的要求就是防湿和密封。满足不同的要求，树脂的性能随之不同。它可用于无菌包装、药品与日用品的包装。LDPE主要用途用于薄膜产品（如农业用薄膜，地面覆盖膜，农膜，蔬菜大棚膜，）包装用膜（如糖果，蔬菜，冷冻食品等膜，液体包装用如吹塑薄膜，重包装袋，收缩包装袋，一般工业包装薄膜和食品袋等，还可用于注塑产品；挤塑管材，电线电缆，吹塑中空容器。
LDPE材料的其他牌号：
Petrothene NA520024 LDPE LyondellBasell Industries
Petrothene NA814000 LDPE LyondellBasell Industries
Petrothene NA831000 LDPE LyondellBasell Industries
Petrothene NA860 LDPE LyondellBasell Industries
Petrothene NA860008 LDPE LyondellBasell Industries
Petrothene NA860241 LDPE LyondellBasell Industries
Petrothene NA870252 LDPE LyondellBasell Industries
Petrothene NA940 LDPE LyondellBasell Industries
Petrothene NA940000 LDPE LyondellBasell Industries
Petrothene NA940085 LDPE LyondellBasell Industries
Petrothene NA940094 LDPE LyondellBasell Industries
Petrothene NA942 LDPE LyondellBasell Industries
Petrothene NA942000 LDPE LyondellBasell Industries
Petrothene NA942085 LDPE LyondellBasell Industries
Petrothene NA942094 LDPE LyondellBasell Industries
Petrothene NA951 LDPE LyondellBasell Industries
Petrothene NA951000 LDPE LyondellBasell Industries
Petrothene NA951080 LDPE LyondellBasell Industries
加工方法 |
| |||||||
物理性能 | 额定值 | 单位制 | 测试方法 | |||||
密度 | 0.918 | g/cm3 | ASTM D1505 | |||||
熔流率 (190°C/2.16 kg) | 0.25 | g/10 min | ASTM D1238 | |||||
抗环境应力开裂 (100% Igepal, F0) | 168 | hr | ASTM D1693 | |||||
硬度 | 额定值 | 单位制 | 测试方法 | |||||
硬度计硬度 (邵氏 D) | 50 | ASTM D2240 | ||||||
机械性能 | 额定值 | 单位制 | 测试方法 | |||||
抗张强度 (断裂) | 14.5 | MPa | ASTM D638 | |||||
伸长率 (断裂) | 600 | % | ASTM D638 | |||||
弯曲模量 | 234 | MPa | ASTM D790 | |||||
薄膜 | 额定值 | 单位制 | 测试方法 | |||||
薄膜厚度 - 经测试 | 51 | μm | ||||||
割线模量 | ASTM D882 | |||||||
1% 正割, MD: 51 μm | 165 | MPa | ||||||
1% 正割, TD: 51 μm | 186 | MPa | ||||||
抗张强度 | ASTM D882 | |||||||
MD: 屈服, 51 μm | 20.7 | MPa | ||||||
TD: 屈服, 51 μm | 19.3 | MPa | ||||||
伸长率 | ASTM D882 | |||||||
MD: 断裂, 51 μm | 300 | % | ||||||
TD: 断裂, 51 μm | 500 | % | ||||||
落锤冲击 (51 μm) | 220 | g | ASTM D1709 | |||||
埃尔曼多夫抗撕强度 | ASTM D1922 | |||||||
MD: 51 μm | 220 | g | ||||||
TD: 51 μm | 200 | g | ||||||
热性能 | 额定值 | 单位制 | 测试方法 | |||||
脆化温度 | -76.0 | °C | ASTM D746 | |||||
维卡软化温度 | 90.0 | °C | ASTM D1525 | |||||
挤出 | 额定值 | 单位制 | ||||||
熔体温度 | 166 到 221 | °C | ||||||
挤压说明 | ||||||||
NA 940 has been designed for excellent processability, bubble stability and good heat sealing over a wide range of extrusion conditions. Optimum properties are found at melt temperatures of 330°-430°F (165°-221°C) and blow-up ratios between 1.8:1 and 2.5:1. Drawdown to 1.5 mil (38.1 microns) is possible at commercial rates when proper extrusion techniques are used. | ||||||||
OTHER PRODUCTS
Copyright © sujiaowuxing.com All Rights Reserved，